Laboratory Analyzers

The BGA - TCD is a Thermal Conductivity based Gas Analyzers used to measure and monitor binary gas streams. It can also monitor one component in a more complex gas mixture when the background gases have the same ratio to each other, or have similar thermal conductivity values.

Specifications

• 0 to 100.0% Resolution 0.1% (For Ar./N2 - N2 in Argon) (Ar/H2)
• 0 to 100.0% Resolution 0.1% (For Ar./CO2 - CO2 in Argon) (Calibration gas required near sample gas)
• Online operation only (not for CO2 pressurized liquid mixture in gas cylinder)

This has two analyzers combined in one cabinet. One analyzer gives Oxygen( with option of % range 00% to .01% or ppm level-2000ppm to 0.1ppm ), and second gives moisture in Dew-point- range- -100 to +20dpC with 0.1C resolution. with converter reading in PPm (V)

Both analyzers are internally connected, so that there is only one input line to be connected. When the analyzer to be switched from one cylinder to next, both the sensors can be bypassed so that no outside air enters the sensor compartment. Hence the analyzer response is fast for the next cylinder reading. This bypass arrangement also increases life of the sensors as it's not exposed to air contamination.

This analyzer is easy to use by unskilled work force.

Both internal analyzers can be calibrated with standard room air.

Being a systems mechanic you know only too well how tough things can get when you’re working out in the field. That’s why your measuring tools need to be rugged and reliable. Like the testo 310 combustion analyzer. Designed especially for use in the field. With this combustion analyzer, you can optimise the combustion process to save fuel and costs.

• Direct O2, CO, flue gas and ambient temperature measurements
• Integrated measurement menu for flue gas, draft, CO ambient airand pressure
• Backlit digital display, rechargeable lithium battery with up to 10 hours life

Total Kjeldahl Nitrogen (TKN) is the U.S. EPA-approved parameter used to measure organic nitrogen and ammonia.

The nitrogen cycle is the means by which atmospheric nitrogen is made available in various forms to living organisms. From the basic molecules of ammonia, nitrate, and nitrite to the more complex amino acids and proteins, nitrogen is essential for living organisms to function. It is also an important part in the smooth operation of many wastewater treatment plants. In order for the cycle to operate smoothly it is vital to know the amount of nitrogen contained in.

MAP O2 (Modified Atmosphere package) is a bench top, portable oxygen analyzer used primarily for the measurement of residual oxygen in gas-flushed food packages. This MAP (Modified Atmosphere Packaging) Oxygen Analyzer is used to measure the gas levels inside individual product packages. Gas is measured by sampling the package using a sample needle inserted into the package . Sample is drawn through a sample line, measured and readings are held on the display until the next sample cycle is requested. Unit may be operated using line power 230 volt ac. The unit measures down to 0.1% for Residual O2 and up to 100% for Enhanced Oxygen.

Three Rranges

• PPM display resolution 0.01 ppm
• 0-10 ppm display resolution 0.1 ppm
• 0-100 ppmdisplay resolution 0.1 ppm

We offer portable Oxygen Analyzer are designed for accurate and reliable measurement of Oxygen in Air, Nitrogen, Argon, Hydrogen etc. These portable oxygen analyzer are based on : Electro chemical Oxygen Sensors, and provide fast response. They require no periodic maintenance like replacing electrodes or electrolyte and can be calibrated using ambient air or standard calibration gas. A digital display provides direct percentage / readout. The power Source is a 9V battery. low power consumption for long battery life. Model PGAOC - 100 is an Oxygen Monitor for general applications. low Oxygen set alarm facility which is usually preset to 19.0% intended for personal safety usage and warns if Oxygen level falls below acceptable to human system.

The TRSMEDOR is an automatic and isothermal gas chromatograph dedicated to sulfur compounds analysis (H2S, mercaptans and sulphides) in different matrices.

Two versions exist : the TRSMEDOR ppm which measures at ppm levels and the TRSMEDOR ppb which measures at ppb levels.

Testo 320 flue gas analyser aids you in measurements in and around heating systems like radiators, burners, etc with only one measuring device.
High-resolution colour graphic display with quick and easy menu structure
Storage space for 500 measurement values

• Measurement of flue gas, draught, pressure, ambient CO, differential temperature and gas leak detection
• O2 and CO sensor and flue gas probe with temperature probe
• TÜV-tested according to EN 50379, Parts 1-3

Details

• GSP 9330 TG (High End 3.3 GHz Spectrum Analyzer)
• DDS Technology and FPGA Designed
• Frequency Range : 9 kHz ~ 3.25 GHz
• Fastest sweep speed up to 204 us
• Support modulation signal analysis
• 2FSK digital signal analysis
• ASK/FSK digital signals demodulation and analysis
• AM/FM analog signals demodulation and analysis
• Complete EMC pretest solution
• EMI Detect mode: Quasi-Peak, Average
• EMI Filter(-6dB): 200 Hz, 9 kHz, 120 kHz, 1MHz
• Dedicated EMC function key

Flame ionization detector (FID) to detect Total hydrocarbon (gases)

• Ranges : 0 to 199.9 PPm (With Resolution: 0.1 PPM)
• , 0to 1999 PPm (With Resolution: 1PPM)
• , 0 to 1.999 % 2 % (With Resolution: 0.001%)
• Power Supply : 230 Volt AC ± 10% 50Hz
• Display : 3 1/2 digit L.E.D
• Cabinet : Panel Mount /Table mount
• Fuel: Pure H2, or H2/N2 mixture (40/60%),
• Air : Zero air or synthetic Air
• Flame Indicator : Fuel shut off; in case of flame failure
• Input Sample: Shuts off instrument if sample pressure goes below min set pressure

Application

• For safe operation of O2 plant to monitor safety level of THC
• Pollution monitoring as atmospheric THC level
• THC level in pure gases like, N2, Ar, He, O2 & Air