Total Hydrocarbon Analyzer

Flame ionization detector (FID) to detect Total hydrocarbon (gases)

• Ranges : 0 to 199.9 PPm (With Resolution: 0.1 PPM)
• , 0to 1999 PPm (With Resolution: 1PPM)
• , 0 to 1.999 % 2 % (With Resolution: 0.001%)
• Power Supply : 230 Volt AC ± 10% 50Hz
• Display : 3 1/2 digit L.E.D
• Cabinet : Panel Mount /Table mount
• Fuel: Pure H2, or H2/N2 mixture (40/60%),
• Air : Zero air or synthetic Air
• Flame Indicator : Fuel shut off; in case of flame failure
• Input Sample: Shuts off instrument if sample pressure goes below min set pressure

Application

• For safe operation of O2 plant to monitor safety level of THC
• Pollution monitoring as atmospheric THC level
• THC level in pure gases like, N2, Ar, He, O2 & Air

Total hydrocabon analyzer for N2, Ar, He, and Air General characteristics

• Continuous measurement system based on a flame ionisation detector.
• System controlled by microprocessor.
• Easy to use .
• Easy maintenance.
• Weak sample flow.
• Less power consumption.
• CE Analyzer. Alphanumeric screen 8 x 40 characters, 64 x 240 pixels
• Multifunctional and real-time software.